|
Article
|
Description
|
|
LK Heat Exchanger Pack -10
The LK Heat Exchanger Pack 10 is primarily designed for glycol based under floor heating systems that must be isolated from other heating systems. Such heating systems are used in garden summer houses or garages, i.e. in areas where the maintenance of a minimum temperature is required during the winter or, can be completely closed off without the risk of the under floor heating system being damaged by freezing.
The LK Heat Exchanger Pack is a ready assembled unit complete with heat exchanger, circulation pump, manometer, expansion vessel, filter and a control valve with automatic thermostat and sensor connected via a capillary tube. The control valve has settings for variable Kv values to adjust to the size of the project. The Heat Exchanger Pack is constructed so that it can be mounted directly to LK Heating Manifolds VKF/VKF-i. It can be connected to the left or right of the manifold. The Heat Exchanger pack can be placed inside LK Cabinet (on the wall type) 1150x180 incl. manifold.
|
Article no.
|
Type
|
Conn. prim/sec
|
Weight (kg)
|
Pcs/Unit
|
| 241 88 10 |
2-3,2 |
3/4"/1" |
12,5 |
1/12 pcs |
|
|
LK Control RA
Automatic temperature control, consists of electronic controller for weather dependent flow temperature control with program for temperature set back and automatic pump control, valve actuator, weather temperature sensor and flow temperature sensor. LK Control can be supplied with a remote control unit for the effect of room temperature on the control unit’s heating curve and remote switching of time programs.
used with:
- LK Manifold Shunt Compact A+ 2-2,6/3,2
- LK Manifold Shunt Compact A+ 2-1,2/1,6
|
Article no.
|
Voltage
|
Pcs/Unit
|
| 241 81 06 |
230 V AC |
1 pcs |
|
|
LK Control v.3 RA
Complete unit for outdoor temperature-compensated heat regulation, adapted and pre-programmed for LK's Floor Heating System/shunt program. LK Control consists of a control unit, valve actuator as well as an flow and outdoor temperature sensor. As an option, LK Control can be supplemented with LK Room Unit v.3 for affecting the room temperature of the control unit's heat curve and the possibility of remotely controlling the control unit.
- Intended for: LK Heat Exchanger Pack
|
Article no.
|
Voltage
|
Pcs/Unit
|
| 241 91 16 |
230 V AC |
1 box |
|
|
|
