|
In the installation components list below, the designations A, X and AX followed by dimension designation, e.g. X16, are used.
- The designation X indicates that the component is used with LK PE-X Universal pipe.
- The designation A indicates that the component is used with LK PAL Universal pipe.
- The designation AX indicates that the component is used with both LK PE-X and LK PAL Universal pipes.
|
| Article | Description |
|
LK Pipe Pole
LK Pipe Pole is used to the securing of pipe-in-pipe when connecting to radiators and mixers, where pipes are being installed in concrete or on a thermal insulation. Two 300 mm sleeves are included to enable the installer to remove the stand from the concrete for reuse. The pipe holders are fully height adjustable. There are two types of holders: double or quattro for PiP 25.
|
Article no.
|
Type
|
Pipe dim
|
c/c
|
Weight
|
Pcs/Unit
|
| 481 43 91 |
Double |
PiP 25 mm |
40 mm |
4,2 kg |
1 pcs |
| 481 43 90 |
Quattro |
PiP 25 mm |
40-50-40 mm |
4,4 kg |
1 pcs |
|
|
LK Radiator fixture UNI
Used to get a nice, fixed pipe attachment to radiators at cement platforms casted on-site.
The fixture is mounted on edge beams or building frames/form boards.
The fixture is reused at the next workplace.
|
Article no.
|
L x W x H
|
Weight
|
c/c
|
Pcs/Unit
|
| 481 43 92 |
400 x 80 x 102 mm |
0,75 kg |
40 mm |
1/10 pcs |
|
|
LK Radiator coupling
Connection coupling for LK PE-X and PAL Universal pipe against radiator link M22.
|
Article no.
|
Dim
|
Pcs/Unit
|
| 187 06 46 |
M22 x AX16 |
1/5 pcs |
| 185 10 61 |
M22 x X20 |
1/5 pcs |
|
|
LK Fitting Protection 34/25
LK Fitting protection is for use with LK Press-Pex fittings in Pipe-in-Pipe installations.
LK Fitting protection is universal, i.e. LK Fitting protection is adapted for Press-Pex fittings in straight, angled and T-pipe assemblies of dim. 16, 20 and 25.
LK Fitting protection consists of a split plastic casing and is suitable for conduit OD 34 and using spacers, conduit with OD 25. Any unused branches are to be sealed with the plastic washer. The plastic washers and spacers are included.
In addition to aiding insulation (against heat emission and condensation), the brass fittings gain protection from alkali attack from concrete and screed.
|
Article no.
|
Pcs/Unit
|
| 187 07 73 |
1/10 pcs |
|
|
LK Angle Wall Bracket PiP
For pipe exit points in the wall with at least 70 mm of free space in the wall. Secured with LK Angle Wall Support or wooden nogging piece with a thickness of 21 or 28 mm. NT VVS 129 approved.
|
Article no.
|
For PiP with conduit OD
|
Pcs/Unit
|
| 187 22 23 |
25 mm |
1/10/300 pcs |
|
|
LK Angle Wall Support 160
For LK Angle Wall Bracket where wooden nogging pieces are not fitted. Intended for mixer bracket and for 1 hole, 2 hole or 3 hole wall plates. NT VVS 129 approved. Manufactured from 1.25 mm plated sheet steel.
|
Article no.
|
For mixers c/c
|
Length
|
Height
|
Pcs/Unit
|
| 187 22 27 |
160 mm |
700 mm |
200 mm |
1/10 pcs |
|
|
LK Angle Wall Support 150
For LK Angle Wall Bracket where wooden nogging pieces are not fitted. Intended for mixers with c/c 150 mm. NT VVS 129 approved. Manufactured from 1.25 mm plated sheet steel.
|
Article no.
|
For mixers c/c
|
Length
|
Height
|
Pcs/Unit
|
| 187 22 30 |
150 mm |
700 mm |
100 mm |
1/10 pcs |
|
|
LK Wall Fixture 2 x c/c 40
For LK Angle Wall Bracket. The Wall Fixture is intended to mount on a wooden noging piece or a wall stud.
|
Article no.
|
Pcs/Unit
|
| 187 43 70 |
1/10 pcs |
|
|
LK Connection Box
For embedding in concrete floor slab. Manufactured from galvanised sheet steel and equipped with a Styrofoam cap, which is removed after pouring. Height adjustable. Covering tape and fixing plates for reducing from 34 mm to 25 mm conduit enclosed.
|
Article no.
|
Width
|
Length
|
Design
|
Pcs/Unit
|
| 187 23 96 |
300 mm |
300 mm |
Hole on 4 sides |
1/64 pcs |
| 187 25 39 |
200 mm |
300 mm |
Hole on short sides |
1/80 pcs |
|
|
LK Mounting Tool, concrete 150/160
For pipe exits in solid concrete walls. The unit is placed in situ prior to concrete pour. The tool is used with the LK Angle wall bracket or LK Angle wall box , allowing a number of pipe exits with different centres; see below:
With LK Wall Bracket: 2 x c/c 40, 3 x c/c 40, 2 x c/c 150 and 2 x c/c 160.
With LK Angle Wall Box: 2 x c/c 80, 2 x c/c 150 and 2 x c/c 160.
The mounting tool has a centre hole diameter 51 mm for a drain pipe from a washbasin..
Manufactured from 1,25 mm plated sheet steel. NT VVS 129 approved.
|
Article no.
|
W x H x D
|
c/c mixer support
|
Pcs/Unit
|
| 187 43 94 |
220 x 220 x 30 mm |
150/160 |
1/10 pcs |
|
|
LK Wallbox Clamp Bracket
Used for mounting LK Wallbox against LK Mounting Tool, concrete 150/160 (art. no. 187 43 94).
|
Article no.
|
Pcs/Unit
|
| 187 44 34 |
1/50 pcs |
|
|
LK PiP Fixing Aid 25-8
LK PiP Fixing Aid is made of wood. LK PiP Fixing Aid 25-8 is a site installation aid when 25 mm pipe in pipe is connected to a manifold. The support can be dismantled and reused.
|
Article no.
|
Weight
|
Pcs/Unit
|
| 187 17 99 |
0,8 kg |
1/25 pcs |
|
|
LK Wall Mounting Plate
Manufactured from polished stainless sheet steel. Fitting nut 1/2" female. Screwed to LK Angle wall support 160, RSK 187 22 27 or to wood nogging piece.
|
Article no.
|
For Universal Pipe
|
Design
|
Measurements W x H
|
Pcs/Unit
|
|
|
LK Mixer Support
Screw connection with male 1/2" for assembly of mixer according to international standard. Affixed to LK Angle Wall Support (art. no. 187 22 30) for c/c 150 mm or to wood nogging piece.
|
Article no.
|
For Universal pipe
|
Design
|
Diam
|
Pcs/Unit
|
| 187 05 43 |
X16 |
Chrom |
73 mm |
1 pcs |
|
|
LK Cover Plate, single
Plastic, pre-split. Delivered in packages of 25 units only.
NOTE! The minimum c/c distance between the pipes is 45 mm!
|
Article no.
|
For pipe dim
|
Design
|
Diam. x Height
|
Pcs/Unit
|
| 187 23 90 |
16 mm |
White |
45 x 12 mm |
1/25 pcs |
| 187 23 88 |
16 mm |
Chrom |
45 x 12 mm |
1/25 pcs |
| 187 23 91 |
20 mm |
White |
45 x 12 mm |
1/25 pcs |
| 187 23 89 |
20 mm |
Chrom |
45 x 12 mm |
1/25 pcs |
|
|
LK Cover Plate, double
Plastic, pre-split. Adjustable c/c distance 27-63 mm.
|
Article no.
|
For pipe dim
|
Design
|
LxWxH
|
Pcs/Unit
|
| 187 23 92 |
16 mm |
White |
113 x 68 x 12 mm |
1/25 pcs |
|
|
LK End Flange Curved
Intended for use for pipe exits in walls or floors where mixer brackets or wall mounting plate will not be fitted. Integral leakage indicator. NT VVS 129 approved.
|
Article no.
|
For PE-X pipes OD
|
OD conduit pipes
|
Diam.
|
Pcs/Unit
|
| 187 22 22 |
16 mm |
25 mm |
46 mm |
1/10 pcs |
|
|
LK End Flange Plain
Similar to art. no. 187 22 22, but with a lower construction height and smaller diameter in order to fit behind wall plate or mixer bracket. NT VVS 129 approved.
|
Article no.
|
For PE-X pipes OD
|
OD conduit pipes
|
Diam.
|
Pcs/Unit
|
| 187 22 21 |
16 mm |
25 mm |
36 mm |
1/10 pcs |
|
|
LK Pipe Membrane
For sealing between conduit and DPM for walls in wet areas. NT VVS 129 approved.
|
Article no.
|
For conduit pipes
|
Design
|
Pcs/Unit
|
| 481 43 82 |
25 |
1-hole |
1/10 pcs |
| 481 43 83 |
25 |
2-hole, c/c 40 |
1/10 pcs |
| 481 43 84 |
25 |
3-hole, c/c 40 |
1/10 pcs |
|
|
LK Pipe Membrane 48 Wall box
For sealing between LK Angle Wall Box 16 and DPM for bathroom walls. NT VVS 129 approved.
|
Article no.
|
Pcs/Unit
|
| 481 43 86 |
1/10 pcs |
|
|
LK Angle Wall Box Uni 16, single
For pipe exit points in the wall with at least 45 mm cavity in the wall.
The minimum c/c distance between pipe exits is 70 mm.
LK Screw Connections Article no. 187 05 46, 187 08 13, 187 05 47 or 187 05 25 are used for connecting mixers and water taps. NT VVS 129 approved with LK PE-X Universal pipe.
NT VVS 129 approved with LK PE-X Universal pipe.
|
Article no.
|
For PE-X pipe
|
Dim conduit
|
Coupling type
|
Pcs/Unit
|
| 187 43 84 |
AX16 |
25 mm |
½" |
1/20 pcs |
|
|
LK Angle Wall Box Uni 16, double
For pipe exit points in the wall with adjustable c/c distance 153-160 mm. .
The bracket makes it possible for multiple attachment options.
LK Screw Connections Article no. 187 05 46, 187 08 13, 187 05 47 or 187 05 25 are used for connecting mixers and water taps. NT VVS 129 approved with LK PE-X Universal pipe.
|
Article no.
|
For PE-X pipe
|
Dim conduit
|
Connection type
|
Pcs/Unit
|
| 187 43 88 |
AX16 |
25 mm |
½" |
1/10 pcs |
|
|
LK Angle Wall Box Uni 20, single
For pipe exit points in the wall with at least 45 mm cavity in the wall.
The minimum c/c distance between pipe exits is 70 mm.
LK Screw Connections art. no. 187 05 46, 187 08 13, 187 05 47 or 187 05 25, are used for connecting mixers.
NT VVS 129 approved.
|
Article no.
|
For PE-X pipe
|
Dim conduit
|
Coupling type
|
Pcs/Unit
|
| 187 43 85 |
X20 |
34 mm |
½" |
1/20 pcs |
|
|
LK Angle Wall Box Uni 20, double
For pipe outlets from walls with variable c/c distances from 153 to160 mm. Delivered as c/c 153 mm, but can be easily adjusted to c/c 160 mm.
The bracket allows for many alternative attachments.
Use LK connection couplers RSK 187 05 46, 187 08 13, 187 05 47 or 187 05 25 to connect to mixers and water taps.
NT VVS 129 approved.
|
Article no.
|
For PE-X pipe
|
Dim conduit
|
Connection type
|
Pcs/Unit
|
| 187 43 89 |
X20 |
34 mm |
½" |
1/10 pcs |
|
|
LK Angle Wall Box Press Uni 16, Single
For pipe exit points in the wall with at least 45 mm cavity in the wall.
The minimum c/c distance between pipe exits is 70 mm.
Connection to PE-X and PAL pipe with PressPex technique.
LK Screw Connections Article no. 187 05 46, 187 08 13, 187 05 47 or 187 05 25 are used for connecting mixers and water taps. NT VVS 129 approved with LK PE-X Universal pipe.
NT VVS 129 approved with LK PE-X universal pipe.
|
Article no.
|
For PE-X / PAL pipe
|
Dim conduit
|
Connection type
|
Pcs/Unit
|
| 187 71 92 |
AX16 |
25 mm |
½" |
1 pcs |
|
|
LK Angle Wall Box Press Uni 16, double
For pipe outlets from walls with variable c/c distances from 153 to160 mm. Delivered as c/c 153 mm, but can be easily adjusted to c/c 160 mm.
The bracket allows for many alternative attachments.
Coupling of PE-X and PAL using PressPex technique.
Use LK connection couplers RSK 187 05 46, 187 08 13, 187 05 47 or 187 05 25 to connect to mixers and water taps. Approved LK PE-X Universal pipes according to NT VVS 129.
|
Article no.
|
For PE-X / PAL pipe
|
Dim conduit
|
Connection type
|
Pcs/Unit
|
| 187 71 93 |
AX16 |
25 mm |
½" |
1 pcs |
|
|
LK Female Adapter conn
For transition from LK Universal pipe X16 or A16 to other pipe materials when connecting radiators.
For fitting in floors or walls. The minimum c/c distance between coupling boxes is 40 mm.
|
Article no.
|
Pcs/Unit
|
| 187 08 10 |
1 pcs |
|
|
LK Plate For Adapter Conn
Fixing plate used for obtaining c/c 40 mm and c/c 50 mm between LK Adapter Conn.
|
Article no.
|
c/c distance
|
Pcs/Unit
|
| 187 08 11 |
40 mm |
1 pcs |
| 187 08 12 |
50 mm |
1/10 pcs |
|
|
LK Screw Connection
Used with LK Angle Wall Box 16 and LK Angle Wall Box 20. Delivered inclusive of wall plate Ø70mm. Three thread patters [see below].
- 1/2"Male for coupling with the angle wall box angle nipple.
- 3/4"Male for assembly of mixers according to international standard (c/c 150 mm).
- 1/2"Female for transition to external pipeing.
|
Article no.
|
Dim
|
Pcs/Unit
|
| 187 05 46 |
½"M, ¾"M, ½"F |
1 pcs |
|
|
LK Straight Connection
Used with LK Angle Wall Box 16 and LK Angle Wall Box 20. Delivered inclusive of chrome-plated wall plate Ø70mm. Two thread patterns; 1/2"Male for coupling with angle wall box angle nipple and 3/4"Male for assembly to, for example, International Standard [ISO] mixer units.
|
Article no.
|
Dim
|
Pcs/Unit
|
| 187 08 13 |
½"M, ¾"M |
1/10 pcs |
|
|
LK Angle Lockshield Valve
For LK Angle Wall Box 16. Delivered with valve and wall plate diam. Ø 70 mm. Male 1/2" for connection with the angle wall box angle nipple. For continued external piping, adapter for CU12, 15 or X16 can be selected.
|
Article no.
|
Dim
|
Pcs/Unit
|
| 187 05 25 |
½" / CU10 |
1 pcs |
|
|
LK Radiator Bend Support
For LK Universal PiP with conduit pipe dim. 25. Used for pipe exits from floors and designed to be screwed or nailed into the building frame. Reinforced design. Equipped with O-rings for attachment to the conduit before being pushed through the radiator bend support and the leakage indicator at the top. Min 40 mm between pipes.
|
Article no.
|
For conduit pipes OD
|
Pcs/Unit
|
| 481 43 67 |
25 mm |
1 pair |
|
|
LK Pipe Sleeve
For protection of PE-X pipes between floor and radiator. Manufactured from white PE with a lengthwise slit. After length trimming to the pipe sleeve is snapped over the PE-X pipes.
|
Article no.
|
For pipes
|
Length
|
Pcs/Unit
|
| 481 43 55 |
X16 och X20 |
200 mm |
10 pcs |
|
|
LK Combi Pipe Sleeve
For protection of PE-X pipes between floor and radiator. Manufactured from white PE and halved. After length adjustment the parts are snapped together.
NOTE! 1 pair = required for 1 radiator.
|
Article no.
|
For pipes
|
Length
|
Pcs/Unit
|
| 481 43 68 |
X16 och X20 |
230 mm |
1 pair |
|
|
LK Bend Support UNI-floor
For pipe exiting from the floor in LK Universal pipe-in-pipe dim. X16 or X20.
Gives c/c 40 mm between the pipes and should be screwed or nailed to the frame. Manufactured from plated sheet steel.
|
Article no.
|
Pcs/Unit
|
| 481 43 81 |
1/10 pcs |
|
|
LK Bend Support UNI-wall
Combines with LK Bend support UNI-floor where, for instance, radiators are connected from a wall.
Affixed to the floor bend support at the desired height for pipe exit from wall. Variable distance ranging between 280 – 390 mm from the pipe in the floor to wall exit.
|
Article no.
|
Pcs/Unit
|
| 481 43 80 |
1/10 pcs |
|
|
LK Pipe Bending Support
For securing bends on the PE-X pipe. Fitted on any conduit pipe or directly on the PE-X pipe. Dimension 16 is manufactured from HD polythene. Dimension 25 and 34 are manufactured from plated sheet steel.
|
Article no.
|
Pipe diam. OD
|
Radius, exterior measurement
|
Pcs/Unit
|
| 241 79 38 |
16 mm |
120 mm |
1/50 pcs |
| 241 79 79 |
25 mm |
165 mm |
1/10/50 pcs |
| 241 79 53 |
34 mm |
210 mm |
1/10/50 pcs |
| 241 81 26 |
25 mm (PiP) |
120 mm |
1/10/50 pcs |
|
|
LK Clip For Sleeve Pipe
For clipping of conduit pipes. To be nailed of screwed to the frame.
|
Article no.
|
For sleeve pipes OD
|
Pcs/Unit
|
| 187 06 00 |
25 mm |
100 pcs |
| 187 05 71 |
34 mm |
100 pcs |
|
|
LK Clip PE-X/PAL
Equipped with dampening rubber and M8 nut welded on.
For hanger brackets, hangers, threaded bars we refer clients to a pipe wholesaler.
|
Article no.
|
For Universal Pipe
|
Pcs/Unit
|
| 187 05 79 |
AX16 |
1/10/100 pcs |
| 187 05 80 |
AX20 |
1/10/100 pcs |
| 187 05 81 |
AX25 |
1/10/100 pcs |
| 187 15 77 |
A32 |
1/10/100 pcs |
| 187 15 78 |
A40 |
1/10/50 pcs |
| 187 15 79 |
A50 |
1/10/50 pcs |
| 187 15 80 |
A63 |
1/10/50 pcs |
|
|
LK Nail Clip, single
For clipping of conduit pipes to concrete. Pre-drill with an 8 mm drill.
|
Article no.
|
For conduit pipes OD
|
Pcs/Unit
|
| 381 05 13 |
25-34 mm |
1/50 pcs |
|
|
LK Nail Clip, double
For clipping of conduit pipes to concrete. Pre-drill with an 8 mm drill.
|
Article no.
|
For conduit pipes OD
|
Pcs/Unit
|
| 381 05 14 |
25-34 mm |
1/50 pcs |
|
|
LK Pipe Holding Nail
For fastening of LK Conduit dimension 25 in to insulation.
|
Article no.
|
Dim
|
Length
|
Pcs/Unit
|
| 241 77 25 |
20-25 mm |
120 mm |
50/750 pcs |
|
|
LK Fixing Plate
For securing conduit pipes laid in wooden joists.
|
Article no.
|
For conduit pipes OD
|
W x H
|
Pcs/Unit
|
| 187 22 16 |
25 mm |
50 x 60 mm |
1/25 pcs |
| 187 05 74 |
34 mm |
60 x 60 mm |
1/25 pcs |
|
|
LK Protection Sleeve
For protecting joints between conduit pipes and copper pipes. NT VVS 129 approved.
|
Article no.
|
Pcs/Unit
|
| 481 43 85 |
1/10 pcs |
|
|
LK Jointing Sleeve
For joining LK Conduit Pipes. NT VVS 129 approved.
|
Article no.
|
For conduit pipes OD
|
Pcs/Unit
|
| 187 05 45 |
25 mm |
1/10 pcs |
| 187 05 83 |
34 mm |
1/10 pcs |
|
|
LK Nail Protection Plate
Protection for conduit pipes from damage during nailing.
|
Article no.
|
For conduit pipes OD
|
Pcs/Unit
|
| 187 22 28 |
25 mm |
1/10 pcs |
|
|
LK End Protection PiP
For sealing between media pipe and conduit pipe.
|
Article no.
|
For PE-X pipes
|
OD conduit pipes
|
Pcs/Unit
|
| 481 43 69 |
16 mm |
25 mm |
10 pcs |
| 481 43 70 |
20 mm |
34 mm |
10 pcs |
| 481 43 71 |
25 mm |
34 mm |
10 pcs |
|
|
LK End Protection
For sealing between inner pipe and conduit pipe.
|
Article no.
|
For inner pipe/Conduit dim
|
Pcs/Unit
|
| 481 43 93 |
16/25 |
1/10 pcs |
| 481 43 94 |
25/34 |
1/10 pcs |
|
|
LK Protection Cap
For protecting pipe ends during installation. Manufactured from black PVC.
Supplied only in packs of 50.
|
Article no.
|
For pipes OD
|
Pcs/Unit
|
| 187 22 31 |
16 mm |
1 pcs |
| 187 22 32 |
20 mm |
1 pcs |
| 187 22 33 |
25 mm |
1 pcs |
| 187 26 42 |
32 mm |
1/50 pcs |
| 187 26 43 |
40 mm |
1/50 pcs |
| 187 26 44 |
50 mm |
1/50 pcs |
|
 |
LK Leakage Indication Flange
Intended for use for pipe exits in walls or floors where mixer brackets or wall mounting plate will not be fitted. Chrome design.
|
Article no.
|
For PE-X / PAL Pipe dim
|
OD Conduit pipes
|
Diam.
|
Pcs/Unit
|
| 187 71 96 |
16 mm |
25 mm |
44 mm |
1 pcs |
|
